New Construction in Austin, TX

New Construction in Austin, TX

New construction roofing in Austin means installing a roof on a home that’s being built from the ground up, and it typically costs between $15,000 and $45,000 depending on square footage, roof pitch, and material choice. It’s a different job than a Roof Replacement & Installation in Austin, because there’s no old roof to tear off and no hidden decking surprises to negotiate. At Crestview Roofing Co Austin, we handle every new construction roof with the same standard we bring to every job: a written price before the first nail goes in, photo documentation at every phase, and a trackable arrival time so you know exactly when our crew shows up. Call (254) 587-6371 to talk through your project.

We’ve been roofing Austin homes since 2000, and over those years we’ve learned that the difference between a roof that lasts 15 years and one that lasts 30 comes down to what happens before the shingles go on. New construction gives us the chance to do everything right from the start, with no compromises forced by an existing structure.

When You Need New Construction

You don’t “need” new construction roofing the way you need a leak repair. You need it when you’re building. Here are the situations where we’re typically brought in:

• You’re building a custom home. Your general contractor may have a roofing sub, but you’re not locked into that. Many Austin homeowners hire us directly for the roof while the GC handles framing and interior work.
• You’re adding an attached structure. A garage addition, a screened porch, or a second-story bump-out all need new roofing tied into the existing roof line. The flashing work here, the metal that seals the seam where new roof meets old, has to be done right or you’ll be chasing leaks for years.
• You’re putting up an ADU or casita. Austin’s zoning changes have made accessory dwelling units common in neighborhoods like Hyde Park and Crestview. They need their own roof system, matched to the main house or intentionally contrasted.
• You’re building a workshop, studio, or covered outdoor kitchen. Smaller roofs, but they still need proper underlayment, venting, and drip edge. Skipping venting on a small roof is how you get baked shingles that curl in three Austin summers.
• You’re a builder or developer putting up multiple homes. We work with small and mid-size builders who want a roofing partner that shows up when promised and documents everything. That consistency matters when you’re trying to close on a spec home.
• Your existing roof was never installed correctly. Some homeowners come to us after buying a house built in a builder rush, where the roof was slapped on. If the roof is under 5 years old and already failing, full replacement is often cheaper than endless patchwork, and we treat that job much like new construction: strip it all and start clean.

Our New Construction Process

Here’s how a new construction roof works with us. Every step is documented, and you get photos before we cover anything up. The steps follow The Relay Standard, which is our name for the way we run every project: written price first, live arrival tracking, before-and-after photos, and a digital invoice sent by text.

1. Initial walkthrough and written estimate. We come out to your build site, walk the roofline, review your plans or the current framing, and measure. Within 24 hours you get a written price, broken down by line item. That price is the price. No allowances, no “we’ll see what happens” language.
2. Decking inspection and prep. Before any underlayment goes down, we check the sheathing, the plywood or OSB layer that shingles attach to. We look for gaps, uneven seams, and soft spots. On new construction, a framer usually installs the decking, and we flag anything that needs attention before we proceed.
3. Underlayment and ice-and-water shield installation. We lay synthetic underlayment across the entire roof deck and apply ice-and-water shield, a self-sealing membrane, in valleys and along eaves. In Austin, our hail storms and the occasional freeze event make this step non-negotiable. If water gets under your shingles, this is what keeps it out of your house.
4. Flashing, drip edge, and ventilation prep. We install all metal work before shingles: drip edge along the eaves and rakes, flashing around any penetrations like vent pipes or skylights, and ridge or soffit venting per code. Austin requires specific ventilation ratios, and we set it up so your attic moves air properly.
5. Shingle or metal installation. We install your chosen material, whether that’s a GAF asphalt shingle system, CertainTeed designer shingles, or a standing seam metal roof. Every manufacturer has specific nailing patterns and installation specs, and we follow them to the letter so your warranty stays intact.
6. Final inspection and documentation. We walk the roof with you or your builder, photograph every section, and send you the full photo set along with your digital invoice. You see what was installed, top to bottom. If anything is off, we fix it before we consider the job done.

New Construction Pricing in Austin

New construction roofing in Austin runs roughly $550 to $850 per square for asphalt shingles, with a “square” being 100 square feet of roofing area. Metal roofs run higher, typically $900 to $1,400 per square. For a 2,500 square foot single-story home, that usually lands between $15,000 and $22,000 for shingles. A larger two-story with a steep pitch can push past $35,000. These are real ranges based on jobs we’ve priced in Austin, not national averages.

What moves the number:

• Roof pitch. A 4/12 pitch is easy to work. A 12/12 pitch on a modern farmhouse in Mueller means slower work, more safety equipment, and more labor cost.
• Number of valleys, hips, and dormers. Every transition point needs flashing and careful shingle cutting. A simple gable roof costs less than a roof with four dormers and three valleys.
• Material choice. Tamko, CertainTeed, and GAF all make good shingles, but their premium lines cost more. A Tamko Heritage line lands mid-range, while a CertainTeed Grand Manor is toward the top end. Boral tile or steel is its own category.
• Underlayment upgrade. Most builders spec basic felt. We recommend synthetic underlayment on every new build, and it adds a few hundred dollars. Worth every bit of it.
• Decking repairs. On new construction, this usually means fixing nailing mistakes from the framing crew. It’s rare to replace full sheets, but we price for what we see.

We give you a written price before any work starts, and the invoice matches the estimate. That’s not a marketing line, it’s how every Crestview Roofing Co Austin job works. If you’re pricing roofs for a new build, call (254) 587-6371 and we’ll give you a number you can actually build your budget around.

How to Choose Materials for a New Construction Roof in Austin

Material choice on new construction comes down to three things: budget, HOA or neighborhood requirements, and how long you plan to own the home. In Austin, asphalt shingles dominate because they handle our climate well and keep costs manageable. We recommend looking at GAF and CertainTeed for their wind and impact ratings, especially if you’re building in an area that sees hail, which is most of Travis County.

For homeowners who want a longer lifespan, a standing seam metal roof makes sense. It costs more up front, but it reflects heat better, which matters during Austin summers when attic temperatures hit 140 degrees. That reflection translates to lower cooling costs, and the roof will outlast most shingle systems by a decade or more.

If you’re building in a neighborhood with design restrictions, your HOA may dictate material and color. We can work with that. We’ve installed roofs in Tarrytown where the architectural committee wanted specific tile profiles, and we’ve done modern flat-roof details in East Austin that required membrane systems. Whatever the constraint, we spec it right and price it honestly.

What Makes a New Construction Roof Last in Austin’s Climate

Austin roofs deal with five real threats: intense UV exposure, hail, high wind from spring storms, temperature swings, and long stretches of humidity. A new construction roof should be built with all five in mind.

The decking needs to be properly fastened. In a 60 mph gust, a sheet of OSB that’s nailed off-center can lift and take shingles with it. We check nailing patterns before we lay underlayment.

The underlayment needs to be synthetic, not felt. Synthetic holds up better under heat and doesn’t absorb moisture the way felt does. If your roof sits uncovered for a few weeks during the build, felt can wrinkle and degrade before shingles even go on. Synthetic doesn’t.

The ventilation needs to be sized correctly. Austin’s heat doesn’t just bake shingles from above, it radiates up from the attic below. Proper intake at the soffits and exhaust at the ridge keeps shingle temperatures down and extends the life of the roof.

The flashing needs to be done with real care. Most roof leaks in Austin are flashing failures, not shingle failures. On new construction, we get to install flashing before any shingles exist, which means we can do it correctly instead of retrofitting around old work.

Why Choose Crestview Roofing Co Austin for Your New Construction Roof

We’re not the only roofing company in Austin that can put shingles on a new build. But we do three things most others don’t, and they’re the three things that matter when you’re spending $20,000 or more on a roof you’ll live under for decades.

First, the written price. Before we start, you get a line-item price in writing. That number is the number. We don’t “rediscover” problems and bill you extra. On new construction, we’re pricing from known plans and known framing, which means the estimate should be solid, and it is.

Second, the photo documentation. We photograph the decking before underlayment, the underlayment before shingles, and the finished roof from every angle. You get the full set. If there’s ever a question about what’s under your shingles, you have the answer in your phone.

Third, the 365-Day Done Right Promise. If we install a new construction roof and something fails within a year, we come back and fix it at no charge. That’s in writing, included with every job. If the fix fails again, the second visit is also free. We put that in writing because we don’t expect to use it.

Dylan Pace has led Crestview Roofing Co Austin since the early days, and the way we run jobs is built around one idea: homeowners should never have to wonder what they paid for. You’ll know. It’s all documented.

FAQs – New Construction

How much does a new construction roof cost in Austin?

A new construction roof in Austin typically runs $15,000 to $45,000, with most asphalt shingle roofs on average-size homes landing between $18,000 and $25,000. The cost depends on roof size, pitch, material, and the number of valleys and penetrations. Call (254) 587-6371 for a written estimate on your specific build, it’s free and it’s a real number, not a ballpark.

How long does a new construction roof take?

Most new construction roofs in Austin take 3 to 7 days from decking inspection to final photo documentation, depending on roof complexity and weather. A simple gable roof on a starter home can be done in two days. A steep custom roof with multiple dormers might take a week. We give you a timeline with your written price, and we track it through the entire job.

Do you work directly with builders or only with homeowners?

We work with both. If you’re a homeowner acting as your own general contractor, we handle the roof and coordinate with your other trades. If you’re a builder, we work with your schedule and your documentation requirements. In both cases, you get the same written price, the same photo updates, and the same warranty.

Is it cheaper to roof during construction than to replace a roof later?

Yes, and the gap is wider than most people expect. New construction roofing is typically 20 to 30% cheaper per square than a full tear-off replacement, because there’s no old roof to remove, no dump fees, and no hidden decking problems to solve. You also get to choose your materials without constraints. If you’re building, do the roof right the first time.

What type of warranty comes with a new construction roof?

Every new construction roof we install comes with two layers of protection: the manufacturer’s warranty on the materials, which varies by brand and product line, and our 365-Day Done Right Promise, which covers workmanship for a full year in writing. If something we did fails within 365 days, we fix it at no charge. That second visit, if it’s ever needed, is also free.

Get a Written Price for Your New Construction Roof

If you’re building in Austin and need a roofing partner who shows up when promised, documents everything, and puts the price in writing before work starts, call us at (254) 587-6371. We’ll walk your build site, ask the right questions, and give you a number you can plan around. No pressure, no four-hour windows, no surprises. Just a roof done right, with the photos to prove it.

Written by Dylan Pace, Owner at Crestview Roofing Co Austin, serving Austin.