Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Boral Roof Installation in Austin: What to Know First
Boral roof installation in Austin typically runs $14,500 to $28,000 for a full replacement, and most jobs are completed in 3 to 5 working days once materials land. We’re an independent Boral service provider, which means we’ll give you a straight answer on whether a Boral roof even makes sense for your house, then put the scope, timeline, and price in writing before anything gets ordered.
This page is for Austin homeowners who already have Boral roofing, or are weighing it against GAF, Owens Corning, and CertainTeed, and want specifics: how Boral ages here, what fails first, and what an honest install actually costs. If that’s you, call (254) 587-6371 and we’ll come measure the roof and walk you through the numbers.
How Boral Products Fail – and How We Fix Them
Boral makes a serious roof. But Austin sun and hail don’t care what brand is nailed down, and after a decade or two, we see the same handful of problems on Boral jobs across Tarrytown, Allandale, and Circle C. Here’s what actually shows up:
- Boral concrete tile’s surface erosion after hail. Boral’s concrete tile lines, including the heavier barrel profiles, are dense and impact-rated, but Austin hailstorms can spall the tile surface without cracking it all the way through. You’ll see small pockmarks on the tile faces. The tile still sheds water, but the aesthetic damage is real and, on certain Boral finishes, impossible to touch up invisibly. We flag this during install consultations so you’re not surprised when the first big storm comes through.
- Underlayment failure on Boral clay tile roofs from the 1990s and early 2000s. The tile itself can last 50 years. The underlayment underneath it won’t. On Austin homes with original Boral clay tile, we regularly find degraded 30-lb felt that’s dry-rotted along the eaves and valleys. The tiles look fine from the curb, but the roof is relying on luck. A proper Boral roof installation means pulling tile, replacing underlayment, and reinstalling or reusing tile where it’s still sound.
- Boral steel roofing panels with failed fasteners on south-facing slopes. Boral’s stone-coated steel lines take brutal heat on Austin’s south exposures. The panels expand and contract daily, and over time, fasteners with worn-out washers back out just enough to let water sneak through. We see this on Boral steel roofs 15-plus years old. The fix is often replacing the fastener array on the affected slope and resealing, not tearing off the whole roof.
- Valley flashing separation at Boral barrel tile transitions. Barrel tiles look great but leave a bigger gap where valleys meet tile courses. On Boral installs where original valley metal was cut too tight, the expansion cycle in Austin heat pulls the flashing loose. Water then runs under the tile at the worst possible spot. Our fix: remove the valley tile, install properly lapped metal with an open valley detail, and reset the tile to spec.
- Improper original installation: Boral tile over one layer of felt, no battens. Some early-2000s Austin builders cut corners. We’ve torn into Boral roofs in neighborhoods like Brentwood and found tile fastened directly over a single layer of felt on plywood, no batten system, no airspace. That’s a manufacturer-warranty void waiting to happen. When we do a Boral roof installation, we build the system the way Boral’s install specs call for: proper underlayment, counter battens where required, and tile laid on the correct substrate.
Styles & brands we work with
Our Boral Roof Installation Process
Here’s how a Boral job runs with us, from first call to final invoice:
- 1
Call and site visit. You call (254) 587-6371, we set a time, and a technician comes out to measure the roof, inspect the existing deck, and document condition with photos. You’ll get a live arrival time before we show up, not a four-hour window.
- 2
Written proposal. We put the scope, the Boral line being installed, the underlayment spec, the fastener type, the gutter plan, and the total price in writing. No verbal numbers. “If it’s not in writing, it’s just a conversation.”
- 3
Material order and deck prep. Boral tile and steel have real lead times. We order to the exact square count plus waste, and once materials arrive, we strip the old roof and repair any damaged decking before anything new goes down.
- 4
Installation to Boral’s spec. Underlayment, flashings, battens or clips as required, then tile or panels installed in the correct pattern with the right fasteners and laps. We’re not on the clock to hit a quota; Dylan Pace and the crew care more about getting valleys and chimney flashings right than getting done fast.
- 5
Final inspection and photo documentation. We walk the roof with you or send before-and-after photos of every level: deck, underlayment, finished surface, and all penetration flashings. You get a digital invoice by text, tied to the written proposal.
- 6
365-Day Done Right Promise. Our work is covered for a full year. If something we installed fails in that window, we fix it at no charge. Second visit, on us.
See the difference
Before
After
Before
After
Before
AfterWhat Boral Roof Installation Costs in Austin
Boral is a premium roof, and Austin pricing reflects that. Here’s what we tell homeowners before they ever sign:
| Scenario | Typical Cost Range in Austin |
|---|---|
| Full Boral concrete tile installation, standard single-story | $14,500 – $19,000 |
| Full Boral clay tile installation, standard single-story | $18,000 – $27,000 |
| Boral stone-coated steel installation | $16,000 – $24,000 |
| Tear-off and deck repair added | $1,800 – $4,500 depending on deck condition |
| Underlayment replacement under existing Boral tile (tile reset) | $6,500 – $11,000 |
Your roof’s pitch, number of valleys, deck condition, and whether you want a full tear-off or a tile reset all move the price. Get an exact number for your house by calling (254) 587-6371. Estimates are free, and the number we quote is the number on the invoice.
Why Austin Homeowners Call Crestview Roofing Co Austin for Boral Work
Boral is not a roof you hand to a crew that’s never touched tile. Our people have installed Boral concrete and clay across Austin for years, and we know where the weak spots are: valleys, chimney flashings, and the underlayment layers most homeowners never see. When Boral isn’t the right fit, we’ll tell you. We install GAF, Owens Corning, and CertainTeed shingles every week, and if your budget or roof structure points you toward asphalt, we’ll say so and show you the numbers side by side.
Every job gets the same treatment: written price before work starts, before-and-after photos, a trackable arrival time, and a digital invoice by text. The 365-Day Done Right Promise means if it’s not done right, we make it right. Calls are answered by a live person, 24/7, because a leaking roof at midnight in Austin is not a Monday problem.
FAQs
No, as long as the installation follows Boral’s published specs. We install to those specs: correct underlayment, fastener pattern, batten or clip system, and valley detailing. That’s the only way we do Boral roof installation in Austin. If you’re repairing an existing Boral roof that was installed incorrectly by the original builder, the original manufacturer warranty may already be void; that doesn’t affect the 365-Day Done Right Promise on our workmanship. Call (254) 587-6371 and we’ll assess what you currently have.
Sometimes. If your Boral tile line is still in production, we can order matching replacement tiles. If the line has been discontinued, we’ll source from Austin salvage yards or find the closest visual match. The answer depends on the exact Boral series, color, and your roof’s age, so we inspect in person before giving you a recommendation.
For a lot of Austin homes, yes. Boral concrete and clay tile handle UV and hail better than asphalt shingles, and a properly installed tile roof can last 40 to 50 years in Central Texas. The upfront cost is higher, but per year of service life, it’s often the cheaper roof. That said, your roof’s structure needs to handle the weight; we verify framing before we quote a tile installation.
Most full Boral installations in Austin run 3 to 5 working days once materials are on site. Material lead times can add 2 to 4 weeks depending on the Boral line and color. We give you a written schedule before we order anything, so you know exactly what to expect.
We do both. Many Boral roofs in Austin don’t need a full replacement; they need underlayment work, flashing repairs, or a tile reset on a problem slope. We’ll tell you which one you actually need, and the price will be in writing before any work starts. Call (254) 587-6371 for a free assessment.
Written by Dylan Pace, Owner, Crestview Roofing Co Austin at Crestview Roofing Co Austin, serving Austin and nearby areas.